 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (3)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (3)
- (1)
- (2)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
IEC 61034 3 Meter Smoke Density Tester for Cable and Wire
|
| Supply Ability: |
|
| Related proudcts |
cable and wire, |
| Specifications |
Flame Demension: 3,000(W) ¡Á 3,000(D) ¡Á 3,000(H) |
| Price Term: |
EXW |
| Port of loading: |
Chongqing/Shanghai |
| Minimum Order |
|
| Unit Price: |
1 USD/PS |
|
IEC 61034 3 Meter Smoke Density Tester for Cable and Wire
IEC61034 smok density.jpg
Introduction:
IEC 61034 3 Meter Smoke Density Tester for Cable and Wire is the testing equipment measuring
the smoke generated when the cable or optical cable is placed horizontally and burn under definite
fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is
important to measure the smoke generation from the value of light source penetration through the
smoke generated when the cable exposed to the specified standard fire source (ethanol 90¡À1%,
methanol 4¡À1% and distilled water 6¡À1%) 1L¡À0.01L is burned.
Standard:
IEC 61034 - 1 & 2 Measurement of Smoke density of cables burning under defined condition
- part 1 Test apparatus
- part 2 Test procedure and requirements
BS 6853
Code of practice for fire precautions in design and construction of passenger carrying trains
Feature:
- Chamber internal area is 3000mm¡À30mm and it¡¯s structured as Cubic Enclosure with
appropriate fixed iron frame angle
- It¡¯s configured with a door with test glass windows and in both faces of the opposite side
there¡¯s a sealed tran***rent window (minimum 100mmX100mm) with a horizontal light
measure system that allows light penetration.
- Designed to prevent direct sunlight exposure and severe weather change in Enclosure.
- Photocell and Light Source are located in the middle part of both windows of the wall
surface in the opposite side to avoid physical contact.
- A lamp to provide regular light is installed.
- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the
transmissivity of light.
- The reduction of light by smoke is measured using Photocell.
- In order to verify accordingly the intensity of radiation to measure light change by
self-emission, the equipment has been designed to fit various kind of filter in the Light Source.
- Support system to allow |
| Company: |
CHONGQING GOLD MECHANICAL&ELECTRICAL EQUIPMENT CO.,LTD.
|
| Contact: |
Ms. Lily Lu |
| Address: |
Nanping |
| Postcode: |
|
| Tel: |
0086-023-62940030 |
| Fax: |
0086-023-62940030 |
| E-mail: |
|
|
|
Home
