 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (3)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (3)
- (1)
- (2)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
ISO 5658 ASTM E1317 IMO Flame Spread Tester Burning Chamber
|
| Supply Ability: |
500 sets/ year |
| Related proudcts |
burning chamber, |
| Specifications |
Size: 1,650 (w) * 810 (D) * 1,985 (H) |
| Price Term: |
EXW |
| Port of loading: |
Chongqing |
| Minimum Order |
|
| Unit Price: |
1 USD |
|
ISO 5658 ASTM E1317 IMO Flame Spread Tester Burning Chamber China Manufacture
Introduction:
ISO 5658 ASTM E1317 IMO Flame Spread Tester Burning Chamber China Manufacture is used to evaluate combustion characteristics of building materials and ship materials. It measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release.
ISO 5658 ASTM E1317 IMO Flame Spread Tester Burning Chamber China Manufacture method is originated from ISO 5658-2 (Reaction to fire tests¨CSpread of flame- Part 2 Lateral spread on building products in vertical configuration) and measures combustion characteristics of vertical specimen (155mmX800mm).
The specimen is exposed to the reasonable radiant heat field and is measured by thermo couple for exhaust gas calibrated through the progress of combustion as unit of mV. IMO records the spread rate of flame after this records ignition and extinguishment time of flame for each distance of specimens. And the other test results is Heat for ignition (MJ/m2), Heat for sustained burning (MJ/m2), Critical flux at extinguishment (kW/m2), Average heat for sustained burning (MJ/m2), Total heat release (kW) and so on.
Standard:
1, ISO 5658-2 : Reaction to fire tests ¨CSpread of flame - Part 2 Lateral spread on building products in vertical configuration
2, IMO Resolution A. 653(16): Recommendation on fire test procedures for flammability of bulkhead, ceiling and deck finish materials
3, ASTM E 1317 : Standard test method for flammability of marine surface finishes
Main Feature:
1, Rail for easily measuring heat flux of radiant panel at an interval of 50mm.
2, IMO Program to facilitate all calibrations and tests as well as to printout of results by standards (IMO, ISO).
3, Radiant panel temperature controller: Equipment to prevent flame back toward the back side of Radiant panel, check the internal temperature of radiant panel and automatically block gas sol. v/v in case of flame back-flow. |
| Company: |
CHONGQING GOLD MECHANICAL&ELECTRICAL EQUIPMENT CO.,LTD.
|
| Contact: |
Ms. Lily Lu |
| Address: |
Nanping |
| Postcode: |
|
| Tel: |
0086-023-62940030 |
| Fax: |
0086-023-62940030 |
| E-mail: |
|
|
|
Home
