 |
|
|
| |
|
|
|
|
|
|
- (1)
- (1)
- (1)
- (1)
- (3)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (3)
- (1)
- (2)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
ISO 9239-1 Flooring Materials Limited Radiant Tester
|
| Supply Ability: |
|
| Related proudcts |
radiant tester, flooring materials, iso 9239-1 tester, |
| Specifications |
Dimension: 1,400mm(W)*500mm(D)*2,200mm(H) |
| Price Term: |
EXW |
| Port of loading: |
Chongqing |
| Minimum Order |
1 Set |
| Unit Price: |
1 USD |
|
ISO 9239-1 Flooring Materials Limited Radiant Tester
Introduction:
Critical Radiant Flux is the main parameters of the fire risk for flooring materials, it reflects the burning and spreading ability of flooring material specimen under external heat radiation conditions. It is an important index of combustion classification for building products.
According to ISO9239-1,2 and GB/T 11785-2005 requirements, IISO 9239-1 Flooring Materials Limited Radiant Tester is measuring the critical radiant of combustion floor coverings, through the radiation environment of test chamber. It is can also be used to measure the critical radiation of the cellulose insulation floor material.
Specimen is located at down horizon of 30 degree sloped gas radiation panel per horizon surface.
Pilot flame as ignition resource put a part edge of specimen on high temperature side.
This equipment record ignition time by ***rk, moving time which flame horizontal pass by specimen of length.
Application:
1.Building Materials
2.Rail
3.Automotive Interior
4.Other
Standard:
ISO 9239-1 Reaction to Fire Tests for Flooring- Part 1: ***ermination of Burning Behavior Using a Radiant Source
ISO 9239-2 Reaction to Fire Tests for Flooring- Part 2: ***ermination of Flame Spread at a Hat Flux Level of 25kW/m2
ASTM E 648 Standard Test Method for Critical Radiant Flux of Floor- Covering System Using a Radiant Heat Energy Source
ASTM E 970 Standard Test Method for Critical Radiant Flux of Exposed at Attic Flooring Insulation Using a Radiant Heat Energy Source
NFP A 253 Standard Method of Test for Critical Radiant Flux of Floor Covering System Using a Radiant Heat Energy Source (National Fire Code. Vol.6)
KS F ISO 9239- 1 Reaction to Fire Tests for Flooring- Part 1: ***ermination of Burning Behavior Using a Radiant Source
KS F ISO 9239- 2 Reaction to Fire Tests for Flooring- Part 2: ***ermination of Flame Spread at a Hat Flux Level of 25kW/m2
Main Features:
1. All structural components are made |
| Company: |
CHONGQING GOLD MECHANICAL&ELECTRICAL EQUIPMENT CO.,LTD.
|
| Contact: |
Ms. Lily Lu |
| Address: |
Nanping |
| Postcode: |
|
| Tel: |
0086-023-62940030 |
| Fax: |
0086-023-62940030 |
| E-mail: |
|
|
|
Home
